Opening spectra in Sparky
From NMR Wiki
NOTE: Sparky commands shown in bold
First start Sparky
Go to 'File' menu, click 'Open...', select appropriate .ucsf or .save file and click 'Open' button.
If you are starting with .ucsf file (raw data file), then you may need to:
- recommended: change keyboard delay setting to make interaction with software easier
- adjust display aspect ratio (vt)
- adjust contour levels (ct)
- select colors for the spectrum (also in ct)
- when opening 3D and 4D spectra you might need to select which plane is to be displayed