View source
From NMR Wiki
Post your question about NMR, EPR or MRI on our Q&A forum
However, please this space and links below to discuss content of the corresponding wiki page.
Start a new discussion about the current wiki pageDelay labels obscured by wide pulse elements (1)
There have been no changes to this discussion for at least 14 days. If it is concluded, you may want to write a summary.
delay labels are drawn in the middle of channel line (channel to which drawing of the label is assigned by the "show_at" variable. There is no way yet to add extra vertical offset - will be fixed.
Example text cannot be cut and paste (1)
There have been no changes to this discussion for at least 14 days. If it is concluded, you may want to write a summary.
You do not have permission to do that, for the following reason:
You can view and copy the source of this page:
Return to Talk:Pulse sequence drawing.
Fixed (lines can start with the emptyspace now - not that you want to put it in on purpose though). Also I've re-posted example code with a different method - take a look at posting source code. Thanks for pointing this out.
+ signs in disp line phased out (1)
There have been no changes to this discussion for at least 14 days. If it is concluded, you may want to write a summary.
+2@d used to mean relative offset of 20 pixels from the previous anchor, while 2@d meant 20 pixel offset from the left edge of the drawing.
now + signs are not used, all offsets are relative; and line like
disp: +2@a
will generate error message
New discussion pages (1)
There have been no changes to this discussion for at least 14 days. If it is concluded, you may want to write a summary.
discussion pages have been upgraded to "liquid threads". Old one can be found at Pulse sequence drawing (old Talk)
