View source

From NMR Wiki

for User talk:Trent Franks

Jump to: navigation, search

Post your question about NMR, EPR or MRI on our Q&A forum

However, please this space and links below to discuss content of the corresponding wiki page.

Start a new discussion about the current wiki page

View archived threads

CC DARR image (1)

History

There have been no changes to this discussion for at least 14 days. If it is concluded, you may want to write a summary.

You do not have permission to do that, for the following reason:

The action you have requested is limited to users in the group user.

You can view and copy the source of this page:

Trent,

I've "cleaned-up" the CO-CA version of the pulse sequence image at
[[2D_CC-CTUC_Solids]]. I've removed some of the anchors that I thought were not necessary for displaying the sequence.
Maybe I was wrong strictly speaking. Not sure if it is possible to start irradiation simultaneously with turning on receiver and shutting down both at the same instant.

Also I made one long pulse appear taller - maybe in fact it should be smaller - I did not look into the articles (you can also make pulse appear ramped using h1 and h2 parameters on wp line)

Evgeny.

Return to User talk:Trent Franks.

Thanks for cleaning it up. I didn't want to change more than I needed to for fear of an error. About the pulsing during receiver startup, you still can't do that in solids, does it matter for display purposes?

Cool, I took what you did and ran with it a little. It's still maybe not perfect (could use a tangent profile on the CP) but it's better than it was.

Trent

Trent Franks (Talk | contribs)