Permission error
From NMR Wiki
You do not have permission to do that, for the following reason:
Return to User talk:Trent Franks.
CC DARR image (1)
There have been no changes to this discussion for at least 14 days. If it is concluded, you may want to write a summary.
Trent,
I've "cleaned-up" the CO-CA version of the pulse sequence image at 2D_CC-CTUC_Solids. I've removed some of the anchors that I thought were not necessary for displaying the sequence. Maybe I was wrong strictly speaking. Not sure if it is possible to start irradiation simultaneously with turning on receiver and shutting down both at the same instant.
Also I made one long pulse appear taller - maybe in fact it should be smaller - I did not look into the articles (you can also make pulse appear ramped using h1 and h2 parameters on wp line)
Evgeny.
Thanks for cleaning it up. I didn't want to change more than I needed to for fear of an error. About the pulsing during receiver startup, you still can't do that in solids, does it matter for display purposes?
Cool, I took what you did and ran with it a little. It's still maybe not perfect (could use a tangent profile on the CP) but it's better than it was.
Trent
Thanks for cleaning it up. I didn't want to change more than I needed to for fear of an error. About the pulsing during receiver startup, you still can't do that in solids, does it matter for display purposes?
Cool, I took what you did and ran with it a little. It's still maybe not perfect (could use a tangent profile on the CP) but it's better than it was.
Trent
