Adjusting keyboard delay timing in Sparky

From NMR Wiki

Revision as of 20:55, 24 February 2008 by Evgeny Fadeev (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Sparky commands can be typed from the keyboard as combination of two keys. The software has special delay setting helping read those commands.

Any two keys typed within that period will be interpreted as a command. If more time elapses between two keys, then the first keystroke is 'forgotten' by software.

Default setting is 3 seconds which is probably too long.

'File'->'Preferences...' (or type pf)

Type a number about 0.7-1.0 seconds into 'Maximum time between accelerator keys (sec)' field.

Click 'Apply' or 'Ok' button.

Personal tools