Oneshot for Varian (G.A. Morris/M. Nilsson)

From NMR Wiki

Revision as of 06:26, 19 July 2010 by Mathiasnilsson (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

This page is a part of the user-editable NMR Wiki pulse sequence database.

Disclaimer: You are solely responsible for correct use of these materials on your instrument.


search database

see edit instructions

see deposition instructions

report suggestions

Basic facts about Doneshot

Synopsis: DOSY pulse sequence using bipolar gradient pairs

Family: Diffusion experiments

Code authors:

 Gareth A. MorrisMathias Nilsson

Copyright: Manchester University


The Oneshot sequence is suitable for "one-shot" acquisition (only one transient per gradient level), and is also a good general DOSY sequence. The pulse sequence is a more elaborated version of BPPSTE sequence, using bipolar pulse pairs. The refinements include a purge pulse in the diffusion delay, unbalanced gradient pulses in the bipolar pulse pairs as well as heating compensation gradients that are incremented as the diffusion gradients are incremented.

The sequence

The Oneshot sequence



Enters a dialog to set-up the gradient array with equal steps in gradient squared. It is normally advisable to make even the first gradient level significant (e.g. 3G/cm)


Sets the parameter dosytimecubed (\displaystyle \gamma^2 \displaystyle \delta^2  \displaystyle \Delta ') when the pulse sequence is run. Dosytimecubed is a convenient parameter when fitting the data e.g. to produce a DOSY plot.

NB! These macros are compatible with VnmrJ2.3 or older.

Software that can process DOSY data

  • The DOSY package of Vnmr and VnmrJ

Note: expand this list, by creating pages for programs and adding category links "Software" and "DOSY" to those pages.

RF parameters

  • pw,tpwr,tof - 90o pulse, its power level and transmitter offset
  • satdly,satpwr,satfrq - length, power and offset of saturation pulse (used if satmode='y')

Gradient parameters

  • gzlvl1 - amplitude of diffusion encoding gradient
  • kappa - unbalance factor for the bpp pulses. The default of 0.2 is almost always suitable
  • gt1 - total length of gradient encoding pulses gradient (split into two equal length bipolar pulses)
  • gzlvl3, gt3 - amplitude and duration of the spoiler/purge gradient
  • gzlvl_max - safety parameter, will trigger error message if gzlvl1*(1+kappa) > gzlvl_max


  • del - diffusion delay
  • gstab - gradient recovery delay


  • delflag - value 'y' turns on the "diffusion" part of the pulse sequence, 'n' - turns it into a one pulse 1D experiment
  • wet - value 'y' turns on Wet water suppression
  • satmode - value 'y' turns presaturation on


  1. Pelta, Michelle D and Morris, Gareth A and Stchedroff, Marc J and Hammond, Stephen J. A one-shot sequence for high-resolution diffusion-ordered spectroscopy. Magnetic Resonance in Chemistry 40(13):S147--S152, 2002. BibTeX [hammond02]
  2. Pelta, Michelle D and Barjat, Hervé and Morris, Gareth A and Davis, Adrian L and Hammond, Stephen J. Pulse sequences for high-resolution diffusion-ordered spectroscopy (HR-DOSY). Magnetic Resonance in Chemistry 36(10):706--714, 1998. BibTeX [hammond98]

  3. Wu, DH and Chen, AD and Johnson, CS. An improved diffusion-ordered spectroscopy experiment incorporating bipolar-gradient pulses. Journal of Magnetic Resonance, Series A 115(2):260--264, 1995. BibTeX [bppste]

Personal tools